CISRS Scaffolding Training
- CISRS 3 Day Basic Scaffold Inspection – London
- CISRS Scaffolding 2 Day CPD Refresher London
- CISRS COTS (CISRS Operative Training Scheme) London
- CISRS 2 Day Scaffolder CPD Refresher Training (Scaffolder & Advanced)
- CISRS Trainee/Scaffolder Labourer Course (COTS)
- CISRS Scaffolding Part 1 – Tube and Fitting
- CISRS Scaffolding Part 2 – Tube and Fittings
- CISRS Skills Test – Part 2
- CISRS Skills Test – Advanced
- CISRS Advanced Scaffolding – Tube and Fittings
- CISRS Basic Scaffold Inspection
- CISRS Advanced Scaffold Inspection
- CISRS Scaffold Supervisor
- CISRS Scaffold Supervisor Refresher
- CISRS Scaffolding Apprentice
- CISRS Haki SSPTS
- CISRS Layher SSPTS
- CISRS Plettac Metrix – SSPTS
CISRS Skills Test – Advanced
Course Overview
Duration:
2 day
Attendees:
Delegates must have a minimum of 6 months practical experience from completing their CISRS Advanced course and achievement of their NVQ level 3 Access & Rigging prior to attending the Skills Test.
This Skills Test is now a mandatory requirement of the CISRS scheme, regardless of whether a delegate has already achieve the NVQ.
Pre-Requisite: Must hold the following certificate and provide evidence
- CISRS Advanced Certificate (must have held this for a minimum of 6 months)
- Achievement of a NVQ level 3 Access & Rigging Operations
- CITB Health and Safety and Environment Test within 2 years prior to attending the CISRS 2 Day Skills Test. CISRS do accept some other industry recognised Health and Safety qualifications as an exemption to the CITB HS&E Test. Those listed below must be completed within 2 years of the date of application.
Health & Safety Requirements:
- IOSH Working Safely/IOSH Managing Safely/IOSH
- Directing Safely
- FAS Safe Pass
- NEBOSH (General/Construction/International/) H&S Certificate
- SMSTS Certificate
- SSSTS Certificate
or
- Current CCNSG Safety Passport (SCATS)
- Current CCNSG Safety Passport Supervisor (SCATS)
- Current MIST/BOSIET/OPITO Approved Offshore Certificate
Objectives:
To demonstrate the skills appropriate practical skills and practices they have learnt from their CISRS Advanced Training course to the satisfaction of the instructor.
Assessment:
- Erect/dismantle Dead Shore
- Structure type dependent upon number of attendees.
- Completion of load list and handover
- This is a pass/fail assessment
Certification:
Successful delegates will receive a Certification along with their CISRS Advanced card.
PPE:
Hard hats are issued, but PPE including safety harness MUST be brought together with spanners, levels and tapes. Gloves MUST be worn at all times during training. Shorts are not acceptable
Note:
Delegates are allowed a maximum of 1 retake of the Skills Test which must take place at the original Accredited Centre, within a period of no less than 3 months and no more than 6 months after the date of the original test. If a delegate fails a second skills test, they will required to attend a further Advanced course.
